How to Prevent Damage Caused by Press Punch injury

How to Prevent Damage Caused by Press Punch injury causes: In this case, The formation of the cause of damage to the punch press is the lack of necessary protective equipment and equipment, not the opponent into the mold area of ​​the risk operation process to implement useful labor protection; the formation of the punch damage incidents of technical reasons is the operation of the initiative and machine tool movement Hydraulic Marking Machines. In this case, Damage to the ice is often attacked in the following conditions: (1) the operator energy exhaustion Angle Marking machine, attention will not be set, showing false work (2) mold layout unreasonable, messy operation, the operator’s arm in the mold area to stay too long. \u0026 Rsquo; (3) the operator arm is not out of the module when the Kai power slider, perhaps in the middle of the slide and reach out into the mold. (4) closed punch when the operation of more than one person to use the foot switch to control the slider control stroke, in the foot cooperation is wrong. (5) closed punch more than work, by the guardian of the slider control the trip, the care of other operators ill.

(6) adjust the mold, the machine motor is not aborted, because the operation of other reasons the slider suddenly start. (7) punch mechanical, electrical problems, slider movement out of control, showing suddenly even the car or suddenly fall. In this case, These are the basis of the formation of punch damage incidents is the lack of necessary protective equipment and equipment, not the opponent into the mold area of ​​risk operations to implement useful labor protection; In this case, The reason for the formation of punch damage incidents is the operation of the technical movement and machine tool fire tone. The following is the formation of punch damage incidents in the management of the main reasons is the safety standards are not perfect pipe welding machine, in the following circumstances prone to trouble: (1) workers without training qualified on the machine operation. (2) illegal operation. (3) there is no safety equipment, safety equipment may not be damaged, not repair. (4) equipment is out of repair.

posted in Uncategorised by admin

Follow comments via the RSS Feed | Leave a comment | Trackback URL

Leave Your Comment

 
Powered by cnc machine tools | drilling machine. Design by CNC punching machine . Edit by drill machine | punching machine